2016 Sept-Oct WRC Newsletter

PDF Version

Page 1

place it is essential that all members do their bit to ensure the club survives with good leadership and not be left to operate with positions unfilled. So come on folks, volunteer and do your bit.

There has been a lot of activity in the club in the past couple of months. We have had an IOTA contest and BBQ in the park (see Lee’s article), a stand and special event sta- tion at Wythall Commu- nity Associations 50th Anniversary Carnival and a Plug and Play weekend at the begin- ning of September. A major refurbishment of the club’s antenna system has been under- taken with club members under the leadership of professional rig- gers Vinny and Craig to re-rig the antennas and to strengthen the stub mast to make it capable of supporting the five antennas.

On the 27th of September, John G3VRF has arranged another 3/15 evening. This is where 3 club members, each give a 15 minutes mini-talk on a topic of their choos- ing. The last one in April was very Wythall Radio Club meets from 8pm every Tuesday and Friday evening at Wythall House, Wythall Park, Silver Street, Wythall, B47 6LZ, near Birmingham. Visitors are very welcome. Wythall Radio Club is affiliated to the Radio Society of Great Britain. Contact g0eyo@blueyonder.co.uk Summer time and the living is easy! It is the club’s AGM on the 10th of Oc- tober and I understand the chairman, secretary and several of the committee are standing down this year. The con- tinued existence of the club requires that these posts be filled by willing and competent people and whilst we have always been able to rely on those leav- ing committee and officer positions to find and encourage others to take their newsletter wythall radio club “having fun with rf” wythall contest group

www.wythallradioclub.co.uk facebook.com/wythallradioclub www.wythallradioclub.co.uk Sept-Oct 2016 interesting with topics such as SDR radi- os, how to radiate maximum RF and easy to use terrain mapping. The topics of the 3/15 talks are not pre-advertised so you have to turn up to learn what they are which makes it even more interesting.

The RSGB are holding their annual con- vention between the 7th and 9th of Octo- ber in Milton Keynes and a number of our members usually attend. Roger will be representing the training team who will be discussing the proposed syllabus review as well as acting as an invigilator at the Foundation, Intermediate and Advanced examinations held over the same weekend. This issue of the Newsletter also has articles from Tim M0URX about upgrading his QSL bureau software; from Jamie 2E0SDV on recent IOTA operation from the Orkneys; about David 2E0AAI and his small garden antenna prob- lems and an update on what the Training team have been up to. Chris G0EYO

Page 2

projects like this as time goes on you realise that when X feature is added that means you need features Y and Z in there too to make it all work as you need it.

The problem was that this was an OQRS for ONE DXpediiton, we then had to make it work as a multi logbook plat- form and provide seamless operation for all the DXpeditions that I was QSL man- ager for. PDXG were happy to draw up a contract with myself and also for Charles M0OXO, who I work with on the QSL management. That again took quite some discussion about how and what was in the contract and how it was to be paid. We decided that it would be a 3 way split on the cost of the initial devel- opment and then all features after that would be paid for by myself.

So at last the new OQRS is live, thanks to our very own guys at http:// www.barclayjames.co.uk/ for the host- ing, and server updates, Fellow club mem- ber Page 2 Sept-Oct 2016 New OQRS software at www.M0URX.com Another month has passed and once again it has been busy here. After two years of discussion, asking, begging, in- quiring, negotiating and then development I finally have a new OQRS (Online QSL Request System) live on my website. http://www.m0urx.com/

The problem with my old system was that it had far too much manual work for me to process each QSL request, every request had to be manually inputted into my log- ging software, which when you are man- aging a major DXpedition it meant hours and hours of data input from the OQRS to the logs.

I cannot use Club Log for the QSL man- ager work because this would involve having dozens of accounts and becomes very complicated when other people have access to the account uploading logs and interfering with the data that I needed.

I have discussed so many options with the Club Log team but what I was asking for was an application to automate all my QSL work from one account, and for it to upload to LoTW, and to do log searches, QSL requests for both direct and bureau, to take addresses, PayPal payments, donations for the DXpeditions, process QSL cards free for people that donate using the PayPal service of the DXpedi- tion team and so much more data that I needed to be able to be recorded on the OQRS ….. It was quite clear from the beginning that it was not going to be easy, as every addition meant something else would not work so it meant a com- plete rethink.

I had also looked around to find a profes- sional coding, programmer that could do it from scratch, well certainly not in this country, I just could not afford the high cost involved, I could not expect it be done for free and in reality the going rate is anything from £50 - £100 an hour or more.

Two years ago I was asked by the Perseverance DX Group to be their “Mailing Consultant” I would advise them on the best way to mail all the QSLs from TX3X Chester- field Island DXpedition and to put in a quote for all the materi- als to get the QSL work com- pleted. They had decided that, as I had found, Club Log was not able to provide certain features that major DXpeditions need. So they were going to develop their own OQRS and asked me if I would help by providing them with advice as to what would be needed on the OQRS and how it would work? Well, to be honest I couldn’t be- lieve my luck as this was something that I had been looking into for some time. I asked If I could have any access to such software in any future development and we continued for the next year or so to work on this idea. The priority though was to use it for TX3X and then go on from there.

The PDXG outsourced the development of the coding / programming to consult- ants in India, and this was vital for the success of the project. At US$ 15 an hour it was the next best thing to being free as far as I was concerned. The TX3X OQRS / log search was tested for several months before it went live on the expedition website and worked very well. Yes there were bugs to fix but the pro- grammers worked to fix it. As always in

Page 3

Page 3 Sept-Oct 2016 James M0YOM has been superb at providing the IT support I need here. James gives me the confidence that we have a very reliable and highly profes- sional team looking after the software on the server.

I am pleased to report the QSL requests are coming in well and a huge amount of manual time has been saved to post out the QSL cards. Although we still have some programming work to do, I have a feeling this will be on ongoing project for a long time to come.

Tim M0URX

New OQRS software cont’d Morse more popular than ever! The amateur licence removed the need to be able to send and receive morse at 12wpm if you wanted to operate on the HF bands in 2001. Learning and passing the morse test was a big obstacle for many amateurs and they had to satisfy themselves with operating on VHF or higher bands. As a consequence morse is the amateur radio version of Marmite, love it or hate it.

As part of the Foundation examination we require students to do a number of practical assessments such as operating a radio on VHF and HF, making QSO, connecting up equipment and looking at the relationship between the dimensions of a half wave dipole, frequency and the resulting SWR. We are also required to witness the candidate sending and re- ceiving morse. As with all practical as- sessments we make it possible for can- didates to do these exercises with scripts, demonstrations, and above all we want to make the whole exercise fun. The morse assessment does not require the candidate to learn morse. For receiv- ing they are required to write down what they hear, dah’s and dih’s (dashes and dots) and convert them to letters after- wards using a prompt sheet. When it becomes their turn to send a short 20 character message they prepare it first in dih’s and dah’s using the prompt sheet and send that on the morse key for the assessor to transcribe. No one fails this exercise. Some amateurs think this exercise is a waste of time and are trying to remove it from the syllabus. Fortunately I think they are in a minority as I believe that this introduction to morse has helped its revival over the past few years. It seems to be the case that since removing it as a requirement to operate on HF, more people are wanting to use it. We have an example in our own club, John M6KOI, is only interested in CW con- tacts and runs the weekly morse class at Wythall Radio Club. A number of our Foundation / Intemediate and Advanced candidates have been through this class and now regularly use CW when on air. Chris G0EYO

Page 4

Page 4 Sept-Oct 2016 Whilst having no all band HF capabil- ity at home at the moment, my thoughts turned to whether a very small 144 MHz station could make contacts via Meteor Scatter. I’d start- ed off reading Gavin M1BXF’s blog entry here: http:// www.geekshed.co.uk/getting-started- in-meteor-scatter-ms/ which said it could be possible.

My stealthy setup is a 4 element LFA yagi from Innovantennas, on a push up fibreglass pole. The yagi is very well made, just like the antennas on the club mast. There is a trade-off of strength against reliability and surviva- bility in windy conditions. For my pur- pose at home, (and perhaps also at the club too) perhaps the antennas are a little heavier than ideal. My thoughts of mounting a 50 MHz anten- na too on the same push up mast quickly disappeared… Meteor Scatter contacts are made by reflecting signals off the ionised trail of a meteor as it burns up when entering the atmosphere. Meteors are con- stantly hitting the earth, and contacts can be made every day of the year. Most people are familiar with meteor showers which provide not only an impressive visual show, but a much larger volume of meteors on several days each year. More power, more antenna gain, and a receive pre- amplifier will help to make contacts using weaker reflections / smaller me- teors.

The ionised trail might only last for a fraction of a second, so the QSO infor- mation needs to be sent quickly. Origi- nally this meant using very high speed CW – a tape recorder was commonly used to speed up CW, and then played slowly later so the operator could decode. Similarly speaking repetitively very quickly was the way to make SSB QSOs.

These days, machine generated data modes with transmission and decoding being handled by your PC have taken over. Different data modes are used on the different VHF bands, each optimised for the propagation seen. There are two popular PC applications in use: WSJT and MSHV which will easily be found by Google. The QSO format is broken up into 30 second transmit / receive chunks be- tween you and your QSO partner. So it’s important to have your PC clock accurate to within a second. The FSK441 mode used on 144 MHz uses multiple tones at a rate of 441 Baud. Essentially the same short message is transmitted over and over, and you cross your fingers at some point during the 30 second transmission a meteor will go by and permit the en- hanced propagation. Each contact is es- sentially an exchange of callsigns, signal reports and confirmations. The next mes- sage in the agreed flow is only sent when the previous one is received. I had a go during the Perseids shower in August for a few hours, also watching the DXCluster and a specific VHF DX chat room to get an idea of where to listen. I heard stations all over Europe, and eventually was brave enough to try a few contacts and worked Sweden, Croa- tia and the Czech Republic with my barefoot FT857 (50 watts.) It was fun to try something new. It’s not every day you work 3 new countries on 144 MHz. Next stop, more MS, or per- haps some bigger antennas and let’s try for EME… Photo shows the WSJT software, some of the meteor bursts are visible, and then the decoded QSO infor- mation. Lee G0MTN Trying Meteor Scatter in the Perseids Meteor Shower

Page 5

wave which is at right angles to the elec- tric field. This is why magnetic loops are mounted vertically to receive horizontally polarised electric fields. The Midi loop works from 3.5MHz to 14.5MHz it is able to be tuned to resonate at a particular frequency in the range. Loops have a very high Q so their bandwidth on any particular frequency is very narrow per- haps only a few kHz so every time you tune your radio the loop also needs to be re-tuned. They proved popular in the 1960’s for military and embassy commu- nications where space to erect a big hf antenna might not be possible. These are expensive antennas and the Midi measures about 2.5m in diameter and weighs about 20kg. Made of 3 inch alu- minium tube with a large plate capacitor on top it presents quite a significant windload (equivalent to a 5.4ft square plate). In addition to the loop you also need to purchase a tuner/controller and control cable. You would probably also need a suitable rotator as the loop radia- tion pattern is directional. When tuned it can achieve a typically 1.1:1 across the 3.5-14.5MHz frequency range. (goes out to 1.8:1 at 15MHz), Another factor to be taken into account is that it needs to be mounted no less than 2.5m above ground. This means that the top of the antenna is going to be around 5m and quite visible to David’s neighbours, not that he gives a fig of course.

On our first visit, Roger and I dis- cussed with David what was possible to do with the Loop. Such a large load would normally require a significant block of concrete to be put in the ground. ( I reckon 60cm x 60cm x 80cm deep). We looked at whether a screw-in pole socket would do it but the overturning moment on the socket would pull out of ground if the loop wasn’t guyed and David’s garden would be un-useable if we did that.

The important task was to try and get David on air as quickly as possible so we decided to return at a later date with a ground socket and a small stub pole to mount the GP2500 and connect him up via some coax coming out of his bed- room window. After a couple false starts this is Page 5 Sept-Oct 2016 Many of us have the problem of installing a useable HF antenna in a small garden. David 2E0AAI certainly did. His modern 3 story town house near Coughton Hacket gave him a garden about the size of a decent deck. David had tried a G5RV along the fence line but that was only good for receiving. He purchased a Moonraker GP2500 7m whip which prom- ised low VSWR across all bands 80m – 10m. On advice from the RAIBC (David is registered blind) he also purchased an Italian MK1 Midi Tuned Loop Antenna. Roger M0GWM and myself had promised to go and survey David’s garden and offer our advice as to what he should do with his new purchases.

The GP2500 is basically an end-fed wire connected via an integral UN-UN balun to 50ohm coax with the wire being replaced by an aluminium tubular whip 7.3m long. The problem with long wires fed via an UN-Un is that at quarter-wavelength they present a low impedance (15 ohms plus reactance) and at half wavelengths they present a high impedance (High R plus reactance). This is what 7.3m would look like in wavelength terms for each of the hf amateur bands. So the UN-UN balun has to transform a range of impedances from very low to very high to 50 ohms. I don’t know how they do it but they state the VSWR across the amateur bands varies from 1.3:1 to 2.0:1. I suspect the balun has some form of resistive load in it which would make it very inefficient. However it did offer a possible solution to getting David on the air and he had it there ready to install.

The MK1 Midi Magnetic Loop is manu- factured by Italian company Cirro Maz- zoni. Magnetic Loops work on the mag- netic field part of the electro-magnetic what we did and the GP2500 presented a VSWR of between 1.5:1 and 2:1 over the 40m -10m bands. David has been left with this to see how he gets on as he also needs to get used to controlling and operating his equipment (to which he has added an IC7300 in addition to his TS590SG. We have advised him to get a separate in line SWR meter as neither Roger or I are convinced that rig SWR indications are good enough. Unfortu- nately the bands have been poor recent- ly so there is not so much to work (except Italians of course!) on 20m but I am sure David will have worked some stations by the time of our next visit.

David is going to put the loop into store in his garage until some time in the fu- ture we can organise a concrete base and permanent installation. He also needs a 2m/70cm whip installing on a pole on his garage wall. Chris G0EYO

Trials and Tribulations of a Small Garden Antenna Band Wave- length λ VF cor- rected λ 7.3m whip λ 80m 83m 79m 0.1λ 40m 42.2m 40m 0.2λ 30m 29.7m 28,2m 0.25λ 20m 21.1m 20m 0.37λ 17m 16.7m 15.8m 0.46λ 15m 14.2m 13.4m 0.5λ 12m 12.5m 11.9m 0.6λ 10m 10.5m 10m 0.7λ

Page 6

IOTA and club BBQ Islands on the Air 2016 Aside from rare exceptions caused by very poor weather or the outbreak of Foot and Mouth disease, the club has regularly supported VHF National Field Day in July as a competitive event from Wythall Park, usually combining it with a social and barbecue for friends and fami- ly on a Saturday evening.

In recent years the increasing age of the club overall, and perhaps a declining interest in contesting from the current membership has meant that enthusiasm (or free time) for VHF NFD has waned a little. We’d scaled back on the stations we put on air, and in the last years we were down to low power single band activity that attracted literally only a cou- ple of operators. On the flip side, many club members always supported to build and tear down activities, and enjoyed the “weekend in the field”, with some staying under canvas, and the social side was seeing record numbers of visitors. As an experiment, I’d proposed we swap the VHF activity for the popular RSGB Islands on the Air (IOTA) contest at the end of July this year. We’d still get our fill with VHF contacts from the shack during the VHF NFD weekend earlier in the month, and that saw us make contacts from 50 MHz to 1296 MHz using the club array, with more operators taking the mic than we had previously on the field. The IOTA contest is on the 5 classic bands from 10m to 80m, on CW and SSB. Most of the activity was with Europe, so I thought a relatively simple fan dipole at a height of 50 to 70 feet would be good enough without needing to source and erect beam antennas etc.

There’s always lots of work behind the scenes to ensure that even a ‘simple’ station like this comes togeth- er. The main consideration was the club mobile Versa- tower, which is stored offsite in Kings Norton. A work party was needed to check over the tower and make sure tyres and brakes were working, so it was safe to transport to the field. Finding someone to tow the tower itself was another little hurdle to jump. Also as- pects like the generator, fuel, lighting, as well as the radio, antenna and IT needed to be checked over. Thanks to eve- ryone that helped pull this together. As usual the club summer barbecue would be run, so working out numbers, buying food and tracking where the barbecue had been stored were other jobs to be done.

Come the weekend itself, the tower arrived on the pre- booked field at Wythall Park without too much difficulty. Some “undesirable types” had been seen in the area, which meant that the gate to the park needed to remain locked at all times to maintain security. The tower and an- tenna were erected safely, and the two easy ups were built. We had an extra focus on ‘health and safety’ and the tower zone was roped all as normal, and our workers inside wore hard hats and tab- ards.

I’d set up the new club laptop to use N1MM+ software, which with the WinKey from the shack and the TS590, we were able to let the laptop take the strain of sending CW, and also calling CQ on SSB. Never have we been so spoiled! The radio audio was fed to a pair of headsets and an external speaker so casual visitors could listen in. Apart from a higher than expected SWR on 80m SSB, as I’d run out of time to properly tune the wires beforehand, the station overall worked as expected.

New friend of the club and frequent visi- tor Stan SP3HRN is a keen CW contest- Page 6 Sept-Oct 2016

Page 7

Page 7 Sept-Oct 2016 Training Report er, and was looking forward to the event. He did the bulk of the operating actually. IOTA is a contest where strategy is para- mount. Do you run (i.e. call CQ and work) mainland stations quickly for most- ly 5 points a time, or tune the bands and find new IOTA islands for 15 points, and also increase the multiplier total. In the multi-operator section 2 radios were al- lowed to do both of those activities at the same time, but for our first outing we only fielded one station. Otherwise we’d need more radios, antennas, computers with networking, perhaps radio filtering too, as well as the operators to fill the chairs. So with our simpler single radio solution Stan called CQ on CW for most of the time, and I and anyone else that wanted filled in with SSB and tuning for those rare islands on both modes. As well as the contest activity, several other verticals and wires sprung up around the site as part of an ad-hoc plug and play activity, testing and trying out new portable antennas and some mem- bers showing shiny new radios.

We continued right through the night as there was always someone to work. Stan was only persuaded to appear briefly during the social BBQ activities, once again managed excellently by Mike and Anita. We appear to have had more visi- tors than we were expecting, and good food, conversation and company in the field was a big draw. As night fell, the smaller contingent of members camping out huddled around the embers for warmth, and drank a beer or two, or maybe three.

Inside the operating tent, despite the bulk of the contest traffic coming from Europe, we did work some North Ameri- cans and Japan, as well as club member Jamie who was operating from Orkney borrowing a high powered contest sta- tion. After 24 hours our own “100 watt and a wire” station had made 950 con- tacts as G4WAC/P, which should put us hopefully in a reasonable position when the results are announced.

I think the IOTA contest experiment was a success, although admittedly a dedi- cated non-contest “plug and play” week- end is more appealing to many mem- bers. Let’s think about what activities we’d like to try next summer. Lee G0MTN The training team have a bit of a summer break with the Intermediate course finish- ing in July and the Advanced course start- ing at the beginning of September. We had a very successful Intermediate Course with all students passing, so well done Terry, Michael, David, Rob, and Stu- art. I am pleased to report that those guys plus club members Howard 2E0KWH, John, 2E0EGP and Anita 2E0DUO have also signed up for the Advanced Course which runs from now until the exam on the 12th December.

We were able to organise an Intermediate examination for David (was M6KND and now 2E0AAI). What makes this a more noteworthy event is the fact that David is blind. For those of us who are sighted, I don’t think we can begin to appreciate the handicap that David has to overcome to sit an examination such as this. Again Anita 2E0DUO took on the role of reader. This is also a difficult and arduous task to undertake. David has to remember the question and the possible answers where- as those of us who are not so handi- capped can read and re-read the question and possible answers. I thought David and Anita were both exhausted by the process so we say very well done to both of them and of course to invigilators Ian M0IDR and Roger M0GWM who supervised the examination. I think we at Wythall are set- ting the standard by which candidates with disabilities such as David can progress their interest in this hobby and achieve their goals. David has enrolled for the Advanced class and we know this is going to challenge both candidate, tutors and reader even more than it has up to now. We are discussing with RSGB exam team how we can make this a more level playing field so that we can satisfy the RSGB’s declaration that disability should not be a bar to achieving a full licence.

We did try to run an on-line foundation course over the summer months but alt- hough we had some 12 people show an interest previously only one responded to our invitation so we cancelled that. Proba- bly just as well as I had enough stress in my life with a house move and a gammy leg!. We plan to run a class room foun- dation course after the Advanced course starting in January so if you know of any- one who might like to do this please get in touch as numbers we can accommo- date are limited.

The RSGB is undertaking a review of the syllabus for all three levels of the exams. This is being done by the RSGB Examinations Group and the Syllabus Review Working Group. The intention is to better align the Advanced with HAR- EC and to smooth out the steps more evenly between the different levels of exam. (it has be felt for some-time that the gap between Intermediate and Ad- vanced is too big). Also, the syllabus will be refreshed to include more recent technologies and practices currently in use. Later this year an advanced draft of the new syllabus is expected to be avail- able, and there will be consultation with the training community. No changes will be implemented before January 2018 and at least 12 months’ notice will be given between the formal release of the new syllabus and the start of the corre- sponding updated exams.

There have been problems with the new Ofcom licensing system. Licensees have had to re-register to access the new system to check, re-validate or claim their new licence, and sometimes new licence holders have been issued with call signs that appear in call sign lists such as QRZ.com. Ofcom have re- affirmed that none of the call signs is- sued by the new system is a duplicate. Although some of these call signs have been used in the past (which is why they could be found on QRZ.com or Ham- call.net), none has been authorised un- der a valid licence for at least two years. In fact, Ofcom intended to ensure that call signs which were last used more than two years ago were also not recy- cled. The RSGB challenged Ofcom on this, as they were receiving reports that some applicants were still getting recy- cled call signs, Ofcom says that it has now loaded the past ten years’-worth of licensing records into its new licensing system. That means that if a call sign was last used more than ten years ago, the system may recycle it but that call signs used in the last ten years should not be recycled Watch this space.

Chris G0EYO

IOTA cont’d

Page 8

Page 8 Sept-Oct 2016 Jamie’s IOTA expedition to the Orkney’s So on Friday 29th July I embarked on my first DXpedition sort activation to Orkney Islands. This came under the IOTA group EU009 as I was staying and oper- ating on Orkney Mainland. I travelled from Birmingham Airport to Kirkwall via Aberdeen. Flybe offered a great service and I’m pleased to say a comfortable start to my trip.

When I landed in Orkney I was greeted by my host Dave MM0EAX. He took me back to his place and showed me where I would be sleeping. But more important- ly he showed me where the shack was. He got me up and running within an hour or so of my arrival. Making 250 QSO’s in that evening. I then went to see another Radio amateur on Orkney to then go and make another 250 QSO’s in the evening on 40m with a 4 square. That’s already 500 in the log.

With a little bit more pile up experience it was almost time for the IOTA contest. I switched from 2M0SDV to the call sign MS0YHC for the contest and switched the amplifier on. It took a few minutes to get the first call but after that I was away. The calls came thick and fast. The first 100 QSO’s came within an hour. My experience was very good. I was kept fed and watered all through the contest. By the time 1000 QSO’s came it was 00:15z and I was very tired. But I contin- ued through it. But un- fortunately for me QSO numbers dropped for a few hours. I was called out of the shack to ob- serve so very faint Auro- ra behind the clouds. If it had been a clear night I may have had to chance to see my first ever au- roral activity. But I was not that lucky so back to the contest. I was oper- ating for the full 24 hours without much of a break. That got me a nice score. 1723 QSO’s and 2 419 690 point’s before checking.

After the contest I went off to bed for a few hours before getting up again for more food and back down to the shack, where I tried to focus on chasing some DX for 2M0SDV. But the bands were flat after the contest (No surprise there) On the Mon- day I worked just over 500 QSO’s again which took my total number of QSO’s as 2M0SDV to over 1000. Then I went QRT. Or at least that’s what I thought. I was woken up at 08:00 on Tuesday ready for my flight. But instead Dave had told me that Pacific and West coast USA was coming in loud over the pole. So I went into the shack and had a few more calls. With some success to my surprise. I managed Oregon, California and Alaska, A few Japanese stations long path. But to my surprise I was called by a gentleman In Hawaii. So after I’d worked them all I had no further call’s so I contin- ued to pack.

Everything went smoothly from Kirkwall airport back through Aberdeen. A two and a half hour wait in Aberdeen before arriving home in Birmingham airport. It’s a shame my bags didn’t arrive. They showed up at my door 24 hours later. But oh well. I had a great trip and a brand new experience. I’d like to thank the club members who worked me whilst I was up there. And I’d also like to con- gratulate the team who were operating G4WAC/P in the contest.

2M0SDV from EU009 The next issue of the Wythall Radio Club Newsletter will be published at the beginning of Nov 2016