The British 1916 Elliot Bros GPO Pattern Frankenstein Morse Key

As mentioned in a previous article, I purchased this key in 2026 from an online auction in Norfolk at a cost of £33.00 including fees and delivery. It was described as a British 1916 Elliot Bros GPO Pattern Morse Key mounted on a wooden plinth.

1916 Elliot Bros GPO Morse Key
Figure 1: 1916 Elliot Bros GPO Morse Key

Looking through the various online key collection websites, I quickly found a similar key also described as a 1916 Elliot Bros GPO key.

Authentic 1916 Elliot Bros GPO Morse Key
Figure 2: Authentic 1916 Elliot Bros GPO Morse Key

This was known as the GPO Pattern 1056A single-current key. On closer examination, I could see several dissimilarities which needed further investigation.

  1. First and most obvious, my key did not have an Elliot Bros name badge on the front of the key, nor were there any screw holes to indicate that there had ever been one.
Elliot name badge
Figure 3: Elliot name badge

Secondly, the lever arm axle posts on my key are of a different shape to those on the internet key. This seemed strange because the other brass fittings on both keys are identical as is the lever shape. I also noticed that the washers under the large brass terminating screws are slightly different.

The tensioning spring arrangement on my key was also different...

Key base showing fixings
Figure 4: Key base showing fixings
Fibreboard gasket
Figure 5: Fibreboard gasket

How Much Restoration?

Normally I would strip a key like this down to individual components and clean and polish all the brass items, but I decided that the priority should be to get it back to being a working key.

Original spring tensioning arrangement
Figure 6: Original spring tensioning arrangement

From my spring assortment I tried several springs until I found one that gave sufficient tension.

New spring tensioning arrangement
Figure 7: New spring tensioning arrangement

Conclusion: So just what is the origin of this key?

Is it a Frankenstein key, made of different parts from other keys, or is it simply a forgotten cousin that no-one remembers?

These keys are known as GPO pattern keys and were manufactured by numerous companies to a common specification laid down by the General Post Office.

  • Walters Electrical Manufacturing Co. Ltd
  • Automatic Telephone Manufacturing Co. (ATM)
  • Elliott Brothers (London) Ltd
  • H. White & Co.
  • General Electric Co. Ltd (GEC)
  • GPO In-House Factories
  • Royal Ordnance Factories

Final Comment

These keys would have been manufactured in huge quantities and minor variations are to be expected. Perhaps somewhere another identical example exists that will finally identify the true origins of this fascinating key.

I will give it the benefit of the doubt. It is not a Frankenstein, just a long lost relative looking for a good home, which it has now found.

73's de

Chris